what to use to make holes in your belt

To help pull your entire outfit together, creating a new pigsty in your belt tin breathe life into an existing accessory you lot've had in the back of your closet for years.

When it comes to learning how to make another pigsty in a chugalug, there are a few different ways that you lot've likely never explored before.

Instead of heading to the kitchen and grabbing a sharp knife, anyone can achieve professional-quality results with ease.

How to Make Another Pigsty in a Belt?

With the help of these brief tutorials, we guarantee you'll be able to wear your favorite chugalug for longer.

The Knife Method

Most people have experience when it comes to poking a new pigsty in their belt using a knife, but frequently, the hole may tear away at the fragile material.

You may as well find that misusing a knife can create a rugged hole that can drastically shift the way the chugalug fits.

However, there are a couple of actress steps you can have to finish the hole so that it is ideally round without whatsoever ragged edges.

What You'll Need

• Pen
• Knife
• Clear nail shine
• Piece of wood

Directions

Pace i: The first thing you'll want to do is to measure your belt around your trunk to determine where you're going to desire to put the new hole.

Using your pen, mark the spot where you'll be extending to.

Have your belt and lay it out flat on top of a piece of forest, making your preemptive mark a little bigger with the help of your pen.

In one case everything has been mapped out accurately, it'southward time to begin poking the hole.

Footstep 2: Hold the knife so that the indicate is direct over your mark and gently starting time to turn the blade in a circular movement, pushing down with a mild amount of force.

Every turn will push the blade deeper into the material until it eventually punctures through the dorsum.

Flip the chugalug over and on the underside, utilize the knife to cutting away any backlog fabric.

Step 3: We and then recommend finishing the pigsty with clear boom polish, as this will create a seal.

Over time, the fabric around the hole won't fray cheers to the polish.

The Nail Method

If you're not particularly a fan of cut a hole in your belt using a knife, at that place's besides the opportunity for you lot to use a nail and hammer.

This method is one of the more traditional ways, and many professionals will also employ this method to create a perfectly round hole.

Ane of the most considerable advantages of the nail method is at that place's a far less probable chance of the material tearing away from the newly made hole, and information technology should wait identical to the others on your chugalug.

What You'll Need

• Hammer
• Nail
• Pen
• Pocketknife
• Piece of woods
• Clear nail polish

Directions

Step 1: Like to the previous technique, you're outset going to want to measure where you need your new hole.

Put the belt on and mark the expanse with a pen.

Once that is finished, you tin remove the belt and lay it flat on your called piece of forest.

Make sure you place the belt facing upward, as it'due south better to drive the boom through the front of the belt rather than the back.

Pace 2: Taking your boom, agree it steadily on top of the mark that you've fabricated and take your hammer.

Begin hammering the top of the nail, and then it is driven through the thickness of the belt.

If you're trying to brand the adjustments as not bad as possible, try to drive the nail through in as little hits as possible.

Step iii: Taking actress care with this step will maintain the integrity of the leather.

Once the boom is through the belt, remove information technology gently and cutting off any backlog fabric that may be poking through the back.

We find that using a knife is easiest for this step.

Step 4: Using the nail smoothen, coat the inside of the hole y'all have just made.

You lot'll also want to coat the outside on the rear side of the belt.

Similar to the other technique, adding nail smooth prevents the material from fraying and helps to create a more than professional aesthetic.

The Power Drill Method

When you commencement to think about ways to put holes into items, y'all can bet a ability drill is one of the most useful tools you can have.

Using a power drill to add together a new hole in your belt should be relatively simple, especially if you're working on a leather belt.

However, this process can also work on other materials, such every bit plastic, canvas, and patent leather.

What You'll Need

• Power Drill
• Slice of woods
• Pen

Directions

Step i: The principal thing to recall with using a power drill to put a hole in a belt is that the slower you go, the cleaner the hole is going to exist.

With that said, showtime, yous're going to want to mensurate your belt and utilise your pen to marker where yous want to place the hole.

Arrange your belt on top of your slice of wood so that the rear side is facing upwards.

Step 2: Consider using brad-point bits on your drill, as they volition help to make a far cleaner pigsty than metallic-tapping bits.

Hold your drill on elevation of the spot yous have marked and brainstorm drilling into the belt slowly.

Yous'll also find that with this method, the faster you go, the more probable your chugalug is to spin.

Stride 3: Once your power drill has made it through the unabridged thickness of the belt, drill through the pigsty again but to ensure it's as clean as possible.

With this process, you shouldn't have whatsoever backlog cloth that needs to exist cutting off, and the pigsty should look professionally made.

However, if you lot encountered any issues, you tin easily use the clear boom polish pull a fast one on to finish off the holes, so they remain secure.

The Ice Pick Method

Plenty of homes have water ice picks, and unless you lot have an ice maker, you probable don't have a use for it.

However, an water ice choice tin can be an incredible tool that enables you to transform the fit of an onetime belt completely.

Fifty-fifty if you don't have one effectually the firm, it'due south a simple way to make adjustments at any point in fourth dimension without the need for ability tools or special equipment.

What You'll Need

• Pencil
• Water ice Pick
• Knife
• Clear nail polish

Directions

Step one: The directions for calculation another pigsty to your belt using an ice pick are simple.

All you need to do is pre-measure out where you'd like the hole to be, and mark it with your pencil or pen.

Using the ice choice, grab one terminate of the chugalug tightly and brainstorm working the choice through the material slowly and in a circular movement.

Step 2: Once the water ice pick has made its style through the leather, take it out and trim off any excess material that might exist poking through the back of the new hole.

You may besides want to consider finishing the pigsty with clear nail polish to assist prevent fraying and whatever signs of wear and tear around the pigsty.

The Leather Hole Dial Method

Using a leather hole dial is easily the most straightforward way to put a new hole in your chugalug, but it's not likely you have 1 of these tools lying around your business firm.

Compared to a traditional hole dial, these devices are specifically designed for working with thick materials, and their wheel accurately and quickly works through heavy-duty materials.

Depending on the type of leather hole punch you have, y'all may even be able to choose from different hole sizes to adapt your belt.

What we love the virtually well-nigh leather pigsty punches is they assist to make the task so much more straightforward than any other tutorial.

All you have to exercise is line the belt up and punch through the cloth. You'll take loftier-quality results without any worry of accuracy or professional-looking results.

What You'll Need

• Leather hole dial
• Tape
• Pencil

Directions

Stride i: The offset step to this process is to marker where you want the new pigsty to be by trying the chugalug on and making a small-scale puncture spot using your pencil.

Once you've measured the belt on your body, you can take it off and put it on your work surface.

Using your tape, place information technology over the area where you'll want to put the new hole and mark the spot over again using a pencil or pen.

Step ii: At present that y'all have everything accurately measured, you tin utilise your hole punch to punch through the material in your desired location.

Using the tape helps to ensure the material maintains its integrity as a new hole is created.

Once this step is finished, y'all should have an entirely brand-new hole ready to be used.

Tips for Adding a New Pigsty to Your Chugalug

one. Work Slowly

As you tin tell with some of the tutorials, you demand to work slowly, especially if you're adjusting a leather chugalug.

Although leather is sturdy, it is also decumbent to damage when you lot're scraping or puncturing it with a sharp object.

By working slowly, you lot volition be able to maintain control to prevent the material from fraying, vehement, or crumbling away.

Another critical do good of taking your time is that you tin can piece of work to make certain the pigsty you're making isn't too big.

It'due south far besides often that people add together a new belt hole only to find that it's much bigger than the others on the belt.

With patience, yous can create a seamless aesthetic that looks professionally made.

2. Sharpness is Central

Whether you lot're using a power drill or a pocket knife, always make certain the apparatus in your hand is quite sharp.

The sharper the blade or the bit, the easier it will make its mode through the leather, kind of like to butter.

Equally yous will be trying very hard not to damage the integrity of your belt material, sharper tools are jump to get the job done much faster.

Y'all'll as well want to brand sure you don't work too quickly, especially while using a pocketknife, as information technology can tear away at the cloth.

3. Inspect the Material

Almost tutorials y'all'll observe for calculation a new belt loop are for belts made of genuine leather, as it's one of the most durable materials for accessories.

However, not every belt is made of leather, and others may have a college concentration of plastic or pleather (false leather).

Ever make sure your belt is of a loftier plenty quality to be able to handle having new holes poked or drilled into them.

If there is a concern about the chugalug snapping while using an ice pick to put a new hole, you may want to opt for a drill instead.

On the other hand, thicker materials may benefit more than by using a drill rather than trying to work a new hole into the content by mitt.

Inspecting the belt's material will requite you a better understanding of what steps to take to make the most professional holes possible.

4. Creating Iii Holes

Your body is jump to change over the years, and if you take invested in a high-quality belt, why not brand it final longer than a couple of months?

Making a unmarried adjustment past adding one extra hole can be useful for the moment, but you'll want the peace of listen to know your belt volition concluding for much longer.

We highly recommend putting at least three additional holes on your belt, if there'due south plenty space for them.

By taking the time to make more adjustments, you can substantially create a custom chugalug that is sure to fit comfortably for many years to come.

5. Seal the Holes

In these tutorials, y'all'll notice clear nail shine is ane of the about used items, and for a adept reason.

Sealing the holes once they have been made is imperative to ensure the material of your belt doesn't fray or fall apart.

Many take found that when making their belt adjustments at home, the material may spread and tear rather quickly.

If y'all don't have clear nail polish at your disposal, y'all can too consider using clear mucilage and only applying it to the edges of the hole you take fabricated.

Concluding Thoughts

At that place are plenty of techniques you can apply to learn how to make another hole in a chugalug at home.

Instead of having to pay for a professional to do it for you, you tin can likely make any adjustments with the use of everyday tools you have in your shed.

From kitchen knives to power drills, there's a tutorial in this guide that everyone will exist able to employ to their advantage.

glovermousee1986.blogspot.com

Source: https://maleinfashion.com/how-to-make-another-hole-in-a-belt/

Share this post